Dust-contained sanding down to clean, level bare wood. Fine-grit progression for a glass-smooth surface, ready to stain and seal. Priced $2.50 to $4 per square foot. Owner on-site every Hanover job.
Floor sanding is the foundation of every great hardwood result, and it is the step most contractors rush. In Hanover homes — the 1990s colonials near Arundel Mills, the newer townhomes in Arundel Preserve and Oxford Square, the single-family builds across Hanover Farms — decades of foot traffic from BWI and Fort Meade commuters leave the wood scratched, gray, and uneven. Proper floor sanding in Hanover MD from USA Pro Floors removes the worn surface layer cleanly and levels the boards back to flat, fresh wood, so whatever finish goes on top lays down perfectly.
Our Hanover floor sanding process is built around grit progression. We start with a coarse cut (36 or 40 grit) to take off the old finish and any deep scratches, then step through 60, 80, and 100 or 120 grit so each pass erases the scratch pattern of the one before. The big belt sander handles open floor; a dedicated edger reaches walls, closets, and tight Hanover townhome corners the big machine cannot touch. We hand-scrape and buff the transitions so there is no visible line between machine-sanded field and hand-worked edges.
Dust is the difference. We sand with European dust-containment equipment that captures roughly 95 percent of airborne debris straight off the abrasive. In Hanover townhomes and attached units where HVAC systems share air between floors, that keeps the fine wood dust out of your vents, your furniture, and your lungs. You get a clean job site instead of a week of cleanup.
Cupped, water-damaged, or previously botched floors get extra attention. We flatten cupping where the moisture has stabilized, fill gaps and nail holes to match, and feather out high spots so the finished surface is dead level. If a floor was over-sanded by a previous contractor and the tongue-and-groove is exposed, we will tell you honestly before we start rather than after.
Floor sanding in Hanover runs $2.50 to $4 per square foot depending on the floor's condition and how many grit passes it needs. Many homeowners book sanding as the first stage of a full refinish; others want a perfectly sanded, bare-wood surface to apply their own finish. Either way you get written, itemized pricing up front, no surprise fees, and the same owner-on-site standard across the 21076 zip code and nearby Jessup, Elkridge, Odenton, and Severn.
We refinish hardwood floors throughout Hanover and the surrounding Anne Arundel and Howard County communities. Free in-home estimates for any address in these areas:
Maryland Home Improvement Commission licensed and fully insured. Workers' compensation coverage on every Hanover job.
Hanover homeowners, property managers, and real estate agents refer us because results match the promise. No shortcuts, no drama.
Leone Moretti personally checks every Hanover sanding job. You are not handed off to a crew you have never met.
Transparent pricing. Free written estimates. No pressure to upgrade, no surprise fees mid-project, no padded hours.
Included: material, labor, prep work, basic subfloor leveling, demo of existing flooring, and disposal. Not included: shoe molding or baseboard replacement (separate carpentry quote), appliance disconnection or reconnection, and major subfloor replacement beyond patching. We quote those separately if needed — no surprises.
Fill out the form below and we will contact you within 2 hours.