Hardwood Floor Refinishing

Hardwood Floor Refinishing in Baltimore, MD

Sand and refinish your existing hardwood from $2.69 per square foot. Professional hardwood floor sanding, custom stains, oil- and water-based finishes. MHIC #111360. 196 reviews (4.7★ on Google) across Baltimore and the DMV since 2010.

Get Your Free EstimateCall 240-444-0748
See your refinishing price in 60 seconds
From $2.69/sqftCustom Stains & Finishes4.7★ · 196 ReviewsSince 2010
Restore Your Floors

Hardwood Floor Refinishing for Baltimore MD Homeowners

Quick answer: Hardwood floor refinishing in Baltimore, MD runs $2.69 to $4.99 per square foot. A typical rowhome with 500 to 800 sq ft of hardwood lands between $1,345 and $3,992. Leone Moretti, owner · Updated November 2026

Hardwood floor refinishing cost in Baltimore, MD
FinishRate
Natural, 2 coats oil polyurethane$2.69 per sq ft
Natural, 3 coats oil polyurethane$2.99 per sq ft
Natural, 3 coats water-based low-VOC$3.50 per sq ft
Stain + sealer + 2 coats oil$3.50 per sq ft
Stain + sealer + 2 coats water-based$3.99 per sq ft
Exotic species, natural$3.99 per sq ft
Exotic species, stained$4.74 per sq ft

Prices as of November 2026. Not sure which finish? See water-based vs oil-based polyurethane compared, the full refinishing rate card, or price your rooms in the calculator.

Hardwood floor refinishing is the highest-ROI upgrade a Baltimore homeowner can make. A good sand and refinish brings decades-old oak back to factory-new at roughly a third of the cost of replacement, and it locks in another 10-20 years of wear. USA Pro Floors has been handling floor sanding and finishing across Baltimore City, Baltimore County, and the DMV since 2010 — 196 Google reviews later, we are still the team Baltimore rowhome owners call when the floors are tired but the bones are good.

When we refinish hardwood floors, we do a real floor sanding and finishing job — not a screen-and-recoat masquerading as a refinish. We sand down to bare wood, contain the dust at the source with HEPA vacuums, repair loose boards and exposed nails, then stain and coat to the color and sheen you pick. The result is a hardwood floor that looks and feels brand new, for a fraction of a new install.

We carry oil-based polyurethane (the warm amber traditional Baltimore look), water-based polyurethane (fast-dry, low-odor, holds the natural wood tone), and every mainstream stain from natural oak through dark walnut and ebony. On the free estimate we bring stain samples and lay them on your actual floor so you pick with eyes, not a catalog.

What's Included

What Our Sand and Refinish Service Covers

Every sand and refinish quote from USA Pro Floors is a full, itemized scope. No surprise add-ons once the sander is plugged in. Here is what is included when we sand and finish your floors:

Our Process

How We Sand and Finish Your Floors

Flooring pro checking an old hardwood floor with a moisture meter and resetting a loose board
01

Inspect & Prep

Evaluate condition, repair loose boards, set exposed nails, protect walls and fixtures.

Drum sander connected to a HEPA dust extractor sanding a hardwood floor down to bare wood
02

Sanding to Bare Wood

Multi-pass hardwood floor sanding with HEPA-connected equipment strips old finish down to bare wood.

Stain being wiped onto bare oak with stain sample boards on the floor
03

Stain & Color

Your chosen stain goes on evenly after on-site sample approval. No guessing from a color card.

Clear polyurethane finish being applied to a freshly sanded hardwood floor
04

Finish & Seal

Multiple coats of polyurethane with a light screen-sand between coats for a flawless final surface.

Local Context

What Baltimore Hardwood Refinishing Looks Like in Practice

Baltimore hardwood refinishing has its own playbook, shaped by 100+ years of housing stock. Most calls come from one of three buckets. Federal Hill, Canton, Fells Point, and Locust Point rowhomes — narrow 14-foot floor plans, original heart pine or red oak, often 1890s-1920s, where the floors have been sanded twice already and we're working with thin remaining wear layer. We assess each plank before quoting and use a buffer-only re-coat on rooms where a full sand would breach the tongue.

Roland Park, Mount Washington, and Guilford homes are the second bucket — bigger plank red oak from the 1920s-1940s, original finish often shellac that requires a chemical strip before screen-and-coat. We test every Roland Park job for shellac in a back closet before quoting, because the strip step changes timeline by a full day. Customers in 21210, 21218, and 21215 typically pick a Bona Traffic HD water-based finish for the long-term durability.

Third bucket is the post-renovation Charles Village, Hampden, and Patterson Park rowhomes where homeowners pulled up carpet and discovered original hardwood beneath. We evaluate fill-and-stain on water-stained planks, board replacement on damaged sections, and the exotic-vs-domestic match question for kitchens that often have replacement boards that don't match. Free in-home walkthrough usually settles all three before the quote goes out.

Why Us

Why Baltimore Picks USA Pro Floors to Refinish Hardwood Floors

MHIC #111360 · Licensed in Maryland

Maryland Home Improvement Contractor license #111360, fully insured on every refinishing project.

4.7★ · 196 Reviews

196 reviews (4.7★ on Google) built on sand-and-refinish jobs that actually look like the before-and-afters. Ask for references in your neighborhood.

Clean, Contained Sanding

Industrial HEPA vacuums capture sanding dust at the source. Your home stays livable while we work.

Owner On-Site, Every Job

Leone Moretti personally runs and inspects every floor sanding and finishing project. The quoter is the finisher.

Service Area

Where We Refinish Hardwood Floors

We sand and refinish floors across Baltimore City, Baltimore County, Anne Arundel County, and the wider DMV out of our Severn shop at 1464 Georgia Ave, MD 21144.

FAQ

Sand and Refinish FAQ

How much does it cost to refinish hardwood floors in Baltimore MD?
A sand and refinish in Baltimore runs $2.69 to $4.99 per square foot from USA Pro Floors. Price moves with floor condition, number of finish coats, and whether you want a custom stain color. A typical Baltimore rowhome with 500-800 sq ft of hardwood lands between $1,345 and $3,992 to refinish hardwood floors — free, written, itemized estimates, no hidden fees. See our full DMV refinishing cost breakdown for every finish, stair and species rate.
How long does it take to sand and refinish hardwood floors?
A typical sand and refinish job takes 3-5 days start to finish. Day one is hardwood floor sanding, day two is staining, days three through five are finish coats. You can walk on the floors in socks after 24 hours and move furniture back after 72 hours once the final polyurethane coat cures.
How dusty is your hardwood floor sanding process?
Our floor sanding and finishing system uses industrial HEPA vacuums connected directly to the sanders and edgers, capturing dust at the source. The difference from traditional open-bag sanding is dramatic — most clients stay home through the project. Want maximum containment? Our dustless refinishing service ($3.50–$5/sqft) is built exactly for that.
Can you refinish hardwood floors with deep scratches, pet damage, or water stains?
In most cases, yes. Our sand and finish process removes scratches, pet damage, and surface-level water staining. For deep gouges or boards that cupped from a leak, we replace individual boards before we refinish hardwood floors so the final surface is seamless.
Do you refinish hardwood floors across Baltimore County and the DMV?
Yes. We sand and refinish floors across Baltimore City, Baltimore County (Towson, Catonsville, Dundalk, Parkville, Pikesville), Anne Arundel County, Howard County, Washington D.C., and Northern Virginia. USA Pro Floors is headquartered at 1464 Georgia Ave, Severn MD 21144 — right in the middle of the DMV.
Who refinishes hardwood floors near me in Baltimore?
USA Pro Floors does. We are Maryland-licensed hardwood floor refinishers (MHIC #111360), fully insured, and Leone Moretti supervises every Baltimore job personally. If you are searching for hardwood floor refinishing near me in Baltimore City, Towson, Catonsville, Pikesville or Parkville, call 240-444-0748 for a free written, itemized estimate.
Do you offer floor sanding and polishing in Baltimore, or only full refinishing?
Both. Full refinishing sands the floor to bare wood and rebuilds the finish. Floor sanding and polishing, also called a screen-and-recoat or buff-and-coat, abrades only the worn top coat and lays a fresh one, which costs far less and is usually walkable the same day. We inspect the floor first and tell you honestly which one your Baltimore floors need.

Ready to Refinish Your Hardwood Floors?

Free estimates across Baltimore City, Baltimore County, and the DMV — from $2.69/sqft.

Instant Price CalculatorCall 240-444-0748WhatsApp UsRequest Estimate
Free Estimate

Get Your Sand and Refinish Quote

Fill out the form and we will contact you within 2 hours (Mon-Fri 8am-6pm, Sat 10am-3pm).

No spam, no obligation. Response within 2 hours.