Garage floors, basement floors, and commercial slabs across Anne Arundel County — from a shop that sits in the middle of it. We are based in Severn, so your job is minutes from home base, not the far end of a route.
Every contractor says they serve Anne Arundel County. We live in it. The shop is in Severn, 21144 — which means the crew that grinds your slab did not spend ninety minutes on the Beltway first, the follow-up visit is a ten-minute detour, and the ten-year warranty on your floor is backed by a company whose own address sits inside your county.
That geography shapes how we price, too. Mobilization — loading the grinder, dust extraction, travel — is a fixed cost on every epoxy job, and it is the reason small garages cost more per square foot than big ones. Working close to home keeps that fixed cost honest, and Anne Arundel jobs are as close to home as it gets for us.
The county’s concrete deserves specific respect. Between the Chesapeake and the Severn, Magothy, and Patapsco rivers, Anne Arundel garages live with humidity that inland counties do not see, and winter brine off Route 100, I-97, and Ritchie Highway rides in on every commute. Bare concrete absorbs both; it pits at the door line, dusts in the middle, and stains where the cars drip. A ground-in epoxy system seals the slab against all of it — which is why this service exists.
Every slab gets a moisture reading before we quote. Our system tolerates vapor transmission up to 12 lb per 1,000 sq ft per 24 hours — most county slabs pass, including older ones. When one reads over, a moisture-barrier primer (about $280) goes down first, and you see the test number that justified it.
Severn is home base, and we hold dedicated pages for the towns we work most: Annapolis, Glen Burnie, Odenton, and Hanover. Pasadena, Severna Park, Crofton, Gambrills, Millersville, Arnold, and Edgewater are all inside our tightest service ring.
Whatever corner of the county you are in, the price engine is the same: get an instant number on the epoxy cost calculator before anyone visits.
Anne Arundel basements are asking for this floor. Between river humidity and grade-level moisture, county basements are hard on carpet and laminate. A ground-and-sealed epoxy floor is mold-indifferent, rinses clean after a wet winter, and turns a damp storage level into usable space. Basement slabs get the same moisture test first — below grade it matters even more than in the garage.
Waterfront homes: ask about the salt. Pasadena, Severna Park, and Annapolis waterfront garages take salt air on top of road brine. Sealed concrete is the difference between a slab that rinses and one that spalls.
Commercial slabs welcome. Shop floors, showrooms, and warehouse space around BWI, Glen Burnie, and Annapolis get the same diamond-grind prep at commercial scale — and big open slabs are where the per-square-foot rate drops fastest.
Older county stock tests fine more often than you would think. Even pre-1990 slabs usually pass our 12 lb moisture ceiling. We test rather than assume — in both directions. Nobody gets sold a primer their slab did not ask for.
Maryland Home Improvement Commission licensed and fully insured. Workers comp coverage on every Anne Arundel County job, every day.
Anne Arundel County and Fort Meade area homeowners and car collectors refer us because our epoxy holds up to Chesapeake salt and humidity year after year.
Leone Moretti personally runs every diamond grind and topcoat. You are not handed off to a crew you have never met.
Industrial diamond grinders on every job. No acid-etching shortcuts. The bond is permanent, even in salt-air Anne Arundel County garages.
A standard 2-car garage of about 380 square feet runs roughly $3,100 with an epoxy clear topcoat and about $3,600 with polyaspartic, installed. A 1-car bay lands in the mid-$2,000s and a 3-car around $5,000. Because our shop is in Severn, county jobs carry no long-haul mobilization. Price your exact garage on the instant calculator at usaprofloors.com/epoxy-quote/.
Yes — basement slabs are some of our best Anne Arundel work. The process is the same: moisture test first (below grade this is non-negotiable), diamond grind, 100% solids epoxy with flake or solid color, sealed topcoat. The result shrugs off the humidity that ruins carpet and laminate in county basements.
Severn, MD 21144 — inside Anne Arundel County. Annapolis, Glen Burnie, Odenton, Pasadena, Severna Park, Crofton, and Gambrills are all within roughly fifteen minutes of the shop. We are MHIC licensed, #111360, and the license number appears on every contract.
Not when the slab is tested and prepped correctly. Humidity in the air is not the killer — moisture rising through the concrete is, and that is measurable. We test every slab against our system limit of 12 lb per 1,000 sq ft per 24 hours; most county slabs pass, and the ones that do not get a moisture-barrier primer before the base coat. What actually protects the floor day to day is the diamond-ground mechanical bond, which acid-etch prep cannot match.
Yes, and it is common — a weekend kit over acid etch typically lets go in sheets after two or three winters. We grind the failed coating off completely as part of surface prep, fix the reason it failed, and install the full system on clean profiled concrete. Removal-and-recoat is quoted after we see how much of the old film is still bonded.
For Anne Arundel County, usually within a couple of days — the estimate visit is a short drive for us, not a scheduled expedition. Faster still: run your numbers on the instant calculator first, and the on-site visit becomes a confirmation rather than a discovery.
Included: material, labor, prep work, basic subfloor leveling, demo of existing flooring, and disposal. Not included: shoe molding or baseboard replacement (separate carpentry quote), appliance disconnection or reconnection, and major subfloor replacement beyond patching. We quote those separately if needed — no surprises.
Fill out the form below and we will contact you within 2 hours.
Pick your flake blend, enter your garage size, and get a real installed price range. No email wall in front of the number.
Get My Instant PriceOr call 240-444-0748 · MHIC #111360